Установка RTL8169 RTL8168 RTL8101 - r1000 CentOS 5
Драйвер r1000 не включён в ядро CentOS, но без сети оно нам ненадо. Начинаем диагностику присутствия сетевухи:[root@centos ~]# lspci -v | more
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 81aa
Flags: bus master, fast devsel, latency 0, IRQ 177
I/O ports at a800 [size=256]
Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
[root@centos ~]# kudzu -p --class=NETWORK - class: NETWORK bus: PCI detached: 0 device: eth0 driver: r1000 desc: "Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller"сетупим:
[root@centos ~]# wget http://blog.shakirov.com/entry/1000038/file/r1000-kmod-1.05-3.2.6.18_8.1.1.el5.src.rpm [root@centos ~]# rpm -ivh kernel-xen* [root@centos ~]# rpm -ivh kernel-PAE* [root@centos ~]# rpmbuild --rebuild r1000* --target i686 [root@centos ~]# cd /usr/src/redhat/RPMS/i686 [root@centos ~]# rpm -ivh kmod-r1000-1.05-3.2.6.18_8.el5.i686.rpm [root@centos ~]# rpm -ivh kmod-r1000-xen-1.05-3.2.6.18_8.el5.i686.rpm [root@centos ~]# rpm -ivh kmod-r1000-PAE-1.05-3.2.6.18_8.el5.i686.rpm [root@centos ~]# rpm -ivh r1000-kmod-common-1.05-3.2.6.18_8.el5.i686.rpm [root@centos ~]# shutdown -r now [root@centos ~]# ifconfigИ ещё вариант: установить драйвер http://blog.shakirov.com/entry/1000038/file/r8168-8.004.00.tar.bz2
а потом modprobe r8168 или при установке системы использовать дискету
http://blog.shakirov.com/entry/1000038/file/r8168-2.6.18-53.el5-i686-x86_64.img.zip
ссылка по теме: http://wiki.centos.org/HardwareList/RealTekRTL8111b
Слова:
Linux,
Networking
Nov. 25, 2007 // 12:13 [ permalink : LJ ]